MADRIX USB ONE DMX USB Interface LED Lighting Controller IA-HW-001001 for Stage Shows, DJ Events, and Architectural Lighting

Product Description

MADRIX USB One DMX USB Lighting Controller The USB ONE allows you to control 512 DMX channels via Madrix software. DMX-IN/OUT with 5-pin NEUTRIK XLR Port: This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.USB 2.0 Standard: The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s.Power Over USB: The interface is powered directly via the USB port and does not need an additional power supply.Hot Swapping & Plug and Play: Devices can be connected to and disconnected from the computer during use and without a reboot.Remote Control: MADRIX can be controlled remotely using the built-in DMX-IN functions.Frame Rate Stability: Up to 60 devices can be connected to a single USB host controller without having any frame rate problems (60 DMX512 interfaces amount to 30,720 DMX channels).Active USB: Must be connected to an active USB 2.0 hub with a power supply. Technical Specifications Supply Of Power DC 5 V, 500 mA, Power over USB Power Consumption ~ 55 mA during normal operation BTU/h 1.00 during normal operation DMX512 512 DMX channels, input or output Plug 5-pin, XLR, female, NEUTRIK USB 1x port, USB 2.0, type-A male plug, Plug and Play, 2 m cable Weight 105 g (0.23 lb) Temperature Range 10 °C to 50 °C (50 °F to 122 °F) (Operating) | -10 °C to 70 °C (14 °F to 158 °F) (Storage) Relative Humidity 5 % to 80 %, non-condensing (Operating / Storage) IP Rating IP20